AMADOR SAN PEDRO

SITE SAFETY MANAGER

SAUDI ARAMCO, Al-Khobar, Saudi Arabia

PROJECT: PETRO RABIGH SECURITY UPGRADE PACKAGE

LOCATION: Rabigh Refining and Petrochemical Company, Jeddah, Saudi Arabia

ACCOMPLISHMENTS:

• Conducted Risk assessment for confined spaced and working at height
• Reviewed work method system
• Monitored Permit to Work System for Twenty -Three (23) Kilometers Fence Perimeter.
• Advised division leaders of regulatory risks in business processed and provided recommendations for improvement on excavation due to underground facilities.
• Structured programs, produced working documentation and implemented best practices.
• Collaborated with contract team to review client contracts and facilitate personnel compliance training.
• Prepared and presented comprehensive reports to upper management and audit team, covering issues and recommendations.
• Delivered subject matter expertise for internal and external customers on compliance best practices and quality control.
• Consulted with clients on best practices and served as project manager for all process improvements and regulatory initiatives.
• Collaborated with contract team to review client contracts and facilitate personnel compliance training

SATORP PMT HSE ENGINEER

AMCDE/AHCEC, SERVICE MANPOWER PROVIDER, SAUDI ARAMCO TOTAL REFINING, PETROCHEMICAL COMPANY, Al-Khobar 

(SATORP)

AECOM SAUDI ARABIA

SERVICE MANPOWER PROVIDER (SMP)

Al-Khereji Business Center, Level 1 King Faisal Road (Old Khobar/Dammam Coastal Highway) P.O Box 1272 Al-Khobar 31952, Saudi Arabia

ACCOMPLISHMENTS:

• Presented, Implemented and Conducted Exercise Drills for the Emergency Response Plan to Emergency Response Team, to SATORP HSE Staff and to All Packages
• Provision and configuration of Bravo Communications
• Designed the Emergency Management Team Group 17 and 24 simultaneous communications
• Designed and Updated Project to Date Incident Reports and prepared quarterly reports to the Lenders
• Revised and conducted HSE Induction company-wide Meetings
• Conducted Coordination and Safety and Health Meetings with the Project Management Team and EPC Contractors
• Conducted Safety Inspections Weekly and Monthly Project Safety Index Audit on the Construction, pre-commissioning, commissioning and handover to operations
• These were proactive actions to ensure of compliance of Safety Management Systems, contractual agreements, Saudi Laws and international Best Practices
• Conducted Crane Operators Survey to check 3rd Party Inspections and Validation
• Running Quarterly Safety Campaigns
• Conducted research, gathered information from multiple sources and presented results.
• Used coordination and planning skills to achieve results according to schedule.
• Participated in continuous improvement by generating suggestions, engaging in problem-solving activities to support teamwork.
• Resolved conflicts and negotiated mutually beneficial agreements between parties.
• Completed paperwork, recognizing discrepancies and promptly addressing for resolution.
• Proved successful working within tight deadlines and fast-paced atmosphere.
• Maintained energy and enthusiasm in fast-paced environment.
• Used critical thinking to break down problems, evaluate solutions and make decisions.
• Led projects and analyzed data to identify opportunities for improvement.
• Learned new skills and applied to daily tasks to improve efficiency and productivity

SAFETY ENGINEER

SAUDI ARABIAN BECHTEL COMPANY, Oasis, AL –KHOBAR, SAUDI ARABIA

• Reviewed production work processes to detect possible safety concerns, drafting corrective measures where appropriate.
• Designed engineering solutions when facilities or equipment failed safety inspection, verifying future compliance with appropriate guidelines.
• Designed safety protocol drills for fires, accidents, Oil spills and other emergency situations.
• Tested materials and equipment for safety concerns, verifying compliance with NEBOSH CERTIFICATION.
• Developed and enacted safety and quality control plans.
• Supported safety inspection, providing information and facilities guidance to OSHA inspectors during walk-throughs every week.
• Interfaced with medical personnel to maintain optimal worker health standards based on monitorial testing.
• Proctored safety and health training for personnel, reducing safety incident rates by 20%.
• Assisted in worksite incident investigations, helping to determine cause and fault to ascertain liability.

PROCESS/SAFETY ENGINEER

SAUD ARABIAN KENTZ CO. LTD, Khobar, Saudi Arabia

• Reviewed production work processes to detect possible safety concerns, drafting corrective measures where appropriate.
• Designed engineering solutions when facilities or equipment failed safety inspection, verifying future compliance with appropriate guidelines.
• Designed safety protocol drills for fires, accidents, Chemical spills and other emergency situations.
• Tested materials and equipment for safety concerns, verifying compliance with NEBOSH Certification.
• Developed and enacted safety and quality control plans.
• Supported safety inspection, providing information and facilities guidance to OSHA inspectors during walk-throughs.
• Interfaced with medical personnel to maintain optimal worker health standards based on monitorial testing.
• Oversaw third-party contractor operations to maintain Saudi Aramco standards while operating on site.
• Proctored safety and health training for personnel, reducing safety incident rates by 30%.
• Assisted in worksite incident investigations, helping to determine cause and fault to ascertain liability.
• Drafted guidelines for hazard control programs such as fall protection, electrical safety and air quality guidelines.
• Performed regular safety hazard assessments to reduce risks and promote positive behaviors.
• Evaluated current safety program standards and program performance, identified trends and implemented corrective actions.
• Reviewed standard operating procedures against optimal safety standards to verify company conformance and employee adherence with policies.
• Investigated industrial accidents, injuries or occupational diseases to determine causes and preventive measures.
• Investigated root causes of accidents, injuries and illnesses related to product usage to develop solutions to minimize or prevent recurrence.
• Drove internal policies on operations and safety to minimize costs and risks by safeguarding property, equipment and employees.
• Designed safety strategies to meet company needs and supported implementation construction areas

PROCESS/SAFETY ENGINEER

DE NORA NORTH AMERICA, INC, Veronica, New Jersey, USA 

ACCOMPLISHMENTS:

• Conducted Risk Assessment and Hazard Identification Studies
• Conducted Safety meetings with Contractors
• Established and Conducted HSE Training Programs
• Maintained Safe Working System and procedures and offered support and advice to team members
• Provided and maintained Emergency Response Facilities and Conducted Emergency drills
• Conducted Weekly Site Inspections and Monthly Audits
• Participated in accident and incident investigations and contributed to Root Cause Analysis Team
• Represented at company sponsored forums
• Team Leader in HAZOP Analysis Report, The company is engage in the design and construction of Chlor-Alkali plants around the world including maintenance and supplier of consumables in Electro-chemical industries
• Implemented Safety Management System of the Company in compliance to OSHA requirements
• Conducted Safety Trainings to new employees and Fire Evacuation Plan
• Reviewed and recommended process system to ensure safety and compliance to State regulation of New Jersey
• Complied to Environmental Regulations and State Policies in the disposal of Waste Water and recovery
• Reviewed production work processes to detect possible safety concerns, drafting corrective measures where appropriate.
• Designed engineering solutions when facilities or equipment failed safety inspection, verifying future compliance with appropriate guidelines.
• Oversaw third-party contractor operations to maintain Safety standards while operating on site.
• Supported safety inspection, providing information and facilities guidance to OSHA inspectors during walk-throughs.
• Assisted in worksite incident investigations, helping to determine cause and fault to ascertain liability.
• Developed and enacted safety and quality control plans.
• Analyzed chemical features to identify potential health hazards.
• Evaluated adequacy of actions taken to correct health inspection violations.
• Investigated root causes of accidents, injuries and illnesses related to product usage to develop solutions to minimize or prevent recurrence.
• Administered safety tests to assess machinery and equipment and determine potential faults or issues needing repair.
• Created and deployed risk and injury avoidance techniques and emergency protocols in coordination with company leaders.
• Evaluated current safety program standards and program performance, identified trends and implemented corrective actions.
• Assessed overall company safety, identified areas in need of improvement and spearheaded changes to protect personnel.
• Performed regular safety hazard assessments to reduce risks and promote positive behaviors.
• Reviewed production work processes to detect possible safety concerns, drafting corrective measures where appropriate
• Designed engineering solutions when facilities or equipment failed safety inspection, verifying future compliance with appropriate guidelines
• Designed safety protocol drills for fires, accidents, Fluid spills and other emergency situations every quarter.
• Assisted in worksite incident investigations, helping to determine cause and fault to ascertain liability

CHEMICAL TREATMENT SUPERVISOR

DE NORA FAR EAST PRIVATE LIMITED, Tuas, Jurong 

• Major activities of the Company are in the Catalytic Coating Process of Precious Metal on “Dimensionally Stable Anodes” (DSA)”, manufacturing and engineering work of hypochlorite generator and the manufacturing of other titanium products
• Responsible for daily running of Coating Department which included following:
• Project Scheduling
• Material Planning
• Process control
• In-Process Quality Control and
• Maintenance of Machinery and Equipment in Coating Department
• Contributed in improving Quality of Products and Productivity in work process by 15%
• Increased customer satisfaction by resolving issues
• Identified issues, analyzed information and provided solutions to problems
• Learned new skills and applied to daily tasks to improve efficiency and productivity
• Used critical thinking to break down problems, evaluate solutions and make decisions
• Collaborated with team members to achieve target results
• Developed and maintained courteous and effective working relationships
• Worked flexible hours across night, weekend and holiday shifts
• Worked within applicable standards, policies and regulatory guidelines to promote safe working environment

CHEMICAL ENGINEER

MIMAX RIBBONS PRIVATE LIMITED, PTE. LTD, Kallang

Singapore 

Manufacturer of Printer Ribbons and Ink

MIMAX RIBBONS,

PROJECT : Design and Develop Ink Manufacturing Facility

• Prepared Design Basis
• Prepared Control Philosophy
• Drawn PFD and P & ID
• Process Plant Lay-out
• Determined material and equipment specifications for maintenance
• Project commissioning
• Researched and developed novel manufacturing processes to reduce production time
• Formulated industrial risk mitigation strategies, reducing safety violation incidents by 20%
• Evaluated safety processes and procedures to check safety of working conditions
• Prepared standard operating procedures (SOPs) documents for incoming personnel

PRODUCTION SUPERVISOR

ELTEKON CORPORATION, Makati, Manila 

• Of Paint
• Increased team synergy among workers
• Improved work conditions that resulted in 15% increase in productivity

Bachelor of Science: Chemical Engineering

Adamson University - Ermita, Manila